first aid kit safety checklist

First Aid Kit Safety Checklist

Purpose: To ensure first aid kits are adequately stocked, readily accessible, and in good condition for use in case of an emergency. This checklist is designed to comply with safety standards and regulations in Texas.

Instructions: Inspect the first aid kit(s) at the designated frequency (e.g., monthly, quarterly). Check each item and mark whether it passes or fails. If an item fails, note the corrective action required and the date it was completed.

Location of First Aid Kit: _______________

Inspection Date: _______________

Inspector: _______________

First Aid Kit Contents

Item	Required Quantity	Inspected Quantity	Pass/Fail	Expiration Date	Corrective Action	Date Completed
Adhesive bandages	(Specify)			N/A
Gauze pads	(Specify)			N/A
First aid tape	(Specify)			N/A
Antiseptic wipes	(Specify)			(Check Date)
Burn treatment	(Specify)			(Check Date)
Pain relievers (e.g., ibuprofen)	(Specify)			(Check Date)
Gloves (non-latex)	(Specify)			N/A
CPR Mask	1			N/A
First aid guide	1			N/A
Emergency contact list	1			N/A
Eye Wash	(Specify)			(Check Date)

Accessibility and Condition

Item	Pass/Fail	Corrective Action	Date Completed
Kit is clearly labeled		Add label if missing
Kit is readily accessible in the work area		Relocate to accessible area
Kit is protected from damage/contamination		Move to a safer location/replace damaged container
Kit is stored in a clean, dry environment		Clean storage area/move to dry environment

Emergency Preparedness [1], [2], [3], [4], [5]

| Item | Pass/Fail | Corrective Action TO AVOID INJURY OR DEATH, ALWAYS KNOW WHERE THE FIRST AID KIT IS LOCATED [1], [2], [3], [4], [5].

Notes/Comments: [Space for additional notes about the inspection, e.g., specific issues, recommendations, etc.]

Signatures:

Inspector: _________________________ Date: _______________

Supervisor: _________________________ Date: _______________ (Required if failures are noted)