Pre-Task Plan: Installing Metal Wall Panels Using a Boomlift

Date: [DATE] Work Area: [WORK AREA] Task Supervisor: [SUPERVISOR NAME]

1. Task Description

Installation of metal wall panels on a wall using a boomlift.

2. Task Duration

Estimated Start: [START TIME] Estimated Completion: [END TIME]

3. Personnel Involved

• Boomlift Operator
• Installers
• Spotter

4. Task-Specific Hazards and Controls

Hazard	Risk	Control Measures
Unstable ground conditions	Boomlift tipping	- Carry out the lifting work on firm level ground [1].
Falling objects	Injury to personnel below	- Establish a drop zone. - Ensure tools and materials are secured properly.
Crushing hazard	Injury or death	- Ensure exclusion zone is maintained.
Electrocution	Serious injury or death	- Identify and maintain safe clearance from overhead power lines.
Equipment malfunction	Injury or property damage	- Inspect boomlift before use.

5. Required PPE for Today's Task

• Hard hat
• Safety glasses
• High-visibility vest
• Steel-toe boots
• Fall protection harness

6. Tools and Equipment Needed

• Boomlift
• Metal wall panels
• Fasteners
• Hand tools
• Measuring tape

7. Pre-Start Checklist

Area Preparation

• Check the work area for level and stable ground [1].
• Establish and mark exclusion zones.
• Ensure adequate lighting.

Equipment Checks

• Inspect boomlift for proper function.
• Check fall protection equipment.
• Verify all tools are in good working condition.

Communication

• Review hand signals.
• Confirm communication methods between operator, installers, and spotter.

8. Task Steps Overview

1. Inspect boomlift and work area.
2. Position boomlift in a safe location.
3. Load metal wall panels onto the boomlift platform.
4. Raise platform to working height.
5. Install metal wall panels.
6. Repeat steps 4 and 5 until the task is complete.
7. Lower platform and unload remaining materials.
8. Inspect the work.

9. Emergency Response for This Task

• Boomlift malfunction → Lower the platform safely and follow emergency shutdown procedures.
• Fall from boomlift → Activate emergency alarm and provide first aid.

10. Task-Specific Precautions

• Never exceed the boomlift's load capacity.
• Always wear fall protection when working on the platform.
• Be aware of surroundings and potential hazards.

Pre-Task Briefing Confirmation

All workers understand the task, associated hazards, and required controls.

Team Lead Initials: [___] Date: [DATE] Time: [TIME]

Safety powered by SALUS