Pre-Task Plan: Confined Space Entry

Date: [DATE] Work Area: [WORK AREA] Task Supervisor: [SUPERVISOR NAME]

1. Task Description

[Brief description of the specific task to be performed today, including the location and purpose of the confined space entry]

2. Task Duration

Estimated Start: [START TIME] Estimated Completion: [END TIME]

3. Personnel Involved

• [ROLE 1: Entrant(s)]
• [ROLE 2: Attendant]
• [ROLE 3: Entry Supervisor]
• [ROLE 4: Rescue Team (if applicable)]

4. Task-Specific Hazards and Controls

Hazard	Risk	Control Measures
Hazardous Atmosphere (Oxygen deficiency/enrichment, toxic gases, flammable vapors) [1]	Asphyxiation, explosion, poisoning	Test atmosphere before entry and continuously monitor during entry [2]. Provide ventilation to maintain safe atmospheric conditions [3]. Use appropriate respiratory protection (SCBA/SAR) if ventilation is insufficient [4].
Engulfment (by liquids or solids) [5]	Suffocation, crushing	Isolate and blank/blind all potential sources of inflow [5]. Lockout/tagout energy sources.
Configuration Hazards (狭窄的通道，向内倾斜的墙壁) [1]	Entrapment, difficulty in rescue	Ensure adequate space for entry and exit [6]. Use retrieval systems/harnesses [7].
Fall Hazards	Injury from falls	Use fall protection equipment (harness, lifeline) [8]. Ensure proper anchorage points. Guard openings with railings or covers [9].
Hazardous Energy (electrical, mechanical) [8]	Electrocution, injury from moving parts	Lockout/tagout all energy sources [5]. Use intrinsically safe equipment [6].
Traffic Hazards	Struck by traffic	Install warning signs and barricades to protect entrants [6].

5. Required PPE for Today's Task

• [PPE item 1: Hard hat]
• [PPE item 2: Safety glasses/goggles]
• [PPE item 3: Respiratory protection (SCBA/SAR as needed)]
• [PPE item 4: Coveralls/protective clothing]
• [PPE item 5: Safety boots]
• [PPE item 6: Harness with lifeline]

6. Tools and Equipment Needed

• [Tool/Equipment 1: Gas monitor (calibrated)]
• [Tool/Equipment 2: Ventilation equipment]
• [Tool/Equipment 3: Communication equipment (radios)]
• [Tool/Equipment 4: Lighting (intrinsically safe)]
• [Tool/Equipment 5: Retrieval system]

7. Pre-Start Checklist

Area Preparation

• Ensure entry permit is completed and signed [8]
• Post warning signs and barricades [6]
• Review confined space entry procedure and code of practice [10]

Equipment Checks

• Calibrate and test gas monitor [11]
• Inspect PPE and rescue equipment [8]
• Verify ventilation equipment is functioning properly [3]

Communication

• Brief all entrants, attendant, and supervisor on the plan [12]
• Establish communication system and signals [8]

8. Task Steps Overview

1. Test the atmosphere of the confined space before entry [2].
2. Ventilate the confined space to ensure a safe atmosphere [3].
3. Continuously monitor the atmosphere during entry [2].
4. Perform the required work inside the confined space.
5. Maintain communication between entrant and attendant [12].
6. Exit the confined space.

9. Emergency Response for This Task

• Atmospheric Hazard Alarm → [Evacuate immediately; reassess and ventilate] [12]
• Entrant Incapacitation → [Initiate rescue procedure; use retrieval system] [3]

10. Task-Specific Precautions

• Ensure all personnel are trained in confined space entry and rescue procedures [9].
• No hot work unless specifically permitted and with additional precautions [13].
• Maintain continuous communication between entrant and attendant [12].

Pre-Task Briefing Confirmation

All workers understand the task, associated hazards, and required controls.

Team Lead Initials: [___] Date: [DATE] Time: [TIME]

Safety powered by SALUS