Pre-Task Plan: Framing Metal Stud Walls

Date: [DATE] Work Area: [WORK AREA] Task Supervisor: [SUPERVISOR NAME]

1. Task Description

Framing metal stud walls involves measuring, cutting, and assembling metal studs to create the framework for walls in a building. This task includes securing the studs to the floor and ceiling tracks and ensuring the structure is plumb and level.

2. Task Duration

Estimated Start: [START TIME] Estimated Completion: [END TIME]

3. Personnel Involved

Carpenter
Laborer
Supervisor

4. Task-Specific Hazards and Controls

Hazard	Risk	Control Measures
Sharp edges on metal studs	Cuts and lacerations	Wear cut-resistant gloves and long sleeves [1].
Heavy lifting of metal studs	Strains and sprains	Use proper lifting techniques and team lifting for heavy or awkward loads [1].
Working at heights	Falls	Use appropriate fall protection systems such as guardrails or personal fall arrest systems [2].

5. Required PPE for Today's Task

Hard hat
Safety glasses
Cut-resistant gloves
Steel-toed boots

6. Tools and Equipment Needed

Tape measure
Metal snips
Screw gun
Level
Chalk line

7. Pre-Start Checklist

Area Preparation

Ensure work area is clear of debris and tripping hazards.
Verify that all necessary materials are on site.
Confirm that lighting is adequate for the task.

Equipment Checks

Inspect tools for damage or wear.
Ensure all power tools are grounded and in good working condition.
Check that ladders and scaffolding are stable and secure.

Communication

Conduct a pre-task briefing with all personnel.
Establish hand signals or radio communication for team coordination.

8. Task Steps Overview

Measure and mark the layout for the wall on the floor and ceiling.
Cut metal studs and tracks to the required lengths.
Secure the bottom track to the floor and the top track to the ceiling.
Insert and secure metal studs into the tracks at specified intervals.
Check the alignment and plumb of the wall frame.

9. Emergency Response for This Task

Severe cut or injury → Administer first aid and call emergency services if necessary.
Fall from height → Do not move the injured person, call emergency services immediately.

10. Task-Specific Precautions

Ensure all personnel are trained in the use of fall protection equipment.
Keep hands clear of cutting edges and pinch points.
Maintain a clean and organized work area to prevent trips and falls.

Pre-Task Briefing Confirmation

All workers understand the task, associated hazards, and required controls.

Team Lead Initials: [___] Date: [DATE] Time: [TIME]