Personal Fall Protection Equipment Inspection Frequency

This document outlines the inspection requirements for personal fall protection equipment (PFPE) to ensure worker safety and regulatory compliance. It emphasizes adherence to governmental regulations and manufacturer's instructions regarding PFPE inspection and usage.

General Requirements

All personal fall protection equipment (PFPE) must comply with applicable governmental regulations and be inspected and used in accordance with the PFPE manufacturer’s instructions. [1]

Inspection Frequency

The frequency of inspection for personal fall protection equipment is determined by the manufacturer's instructions and applicable governmental regulations. It is imperative to adhere to the more stringent of the two.

Daily Inspection

Before each use, PFPE should be inspected for any signs of damage, wear, or malfunction. This includes checking for cuts, abrasions, deformation, and any other indicators that the equipment may not perform as intended. Remove from service any equipment that fails inspection.

Regular Inspections

In addition to daily inspections, PFPE should undergo regular, more thorough inspections as specified by the manufacturer or relevant regulations. The frequency of these inspections can vary (e.g., monthly, quarterly, annually) depending on the equipment type, usage, and environmental conditions.

Documentation

Maintain records of all inspections, including the date of inspection, the name of the inspector, the condition of the equipment, and any actions taken (e.g., removal from service, repairs).

Specific Equipment Considerations

The following points should be considered for specific equipment types:

• Harnesses: Check webbing for cuts, abrasions, and discoloration. Inspect buckles and D-rings for deformation or corrosion.
• Lanyards: Examine the lanyard material for any signs of damage. Ensure that snap hooks and carabiners operate correctly and lock securely.
• Self-Retracting Lifelines (SRLs): Verify that the lifeline retracts and extends smoothly. Inspect the housing for damage and ensure that the braking mechanism functions properly.

Employer and Job Site Rules

Operators must comply with employer, job site, and governmental rules regarding the use of personal protective equipment. [1]

Safety powered by SALUS