For steel erection activities, there are specific standards and educational requirements to ensure safety and compliance with regulations. Here are some key points:

1. Scope and Application: The requirements for steel erection activities are outlined in Subpart R of the OSHA standards, which apply to the construction, alteration, and repair of buildings, bridges, and other structures where steel erection occurs. This does not include electrical transmission towers, communication towers, or tanks [1].

2. Site-Specific Erection Plan: Employers are encouraged to develop a site-specific erection plan to address unique site conditions and ensure safety. This plan should be developed by a qualified person and include details such as the sequence of erection activities, crane and derrick placement, and stability considerations [2].

3. Training Requirements: Employees involved in steel erection must receive training on the specific hazards they may encounter. This includes fall hazard training and special training for activities like multiple lift rigging and controlled decking zones. Training should be conducted by a qualified person [3].

4. Fall Protection: Employees working on surfaces with unprotected edges more than 15 feet above a lower level must be protected by guardrail systems, safety nets, or personal fall arrest systems. Special provisions apply to connectors and employees working in controlled decking zones [4].

5. Personal Protective Equipment (PPE): Workers must wear appropriate PPE, including hard hats and protective footwear, at all times on the job site. Additional protective gear like gloves and respirators should be used as necessary [5].

6. Hoisting and Rigging: Cranes used in steel erection must be inspected daily by a competent person to ensure safety. This includes checking control mechanisms, safety devices, and other critical components [6].

These guidelines are designed to protect workers from the hazards associated with steel erection and ensure compliance with safety regulations. Employers should ensure that all safety plans and training programs are up-to-date and tailored to the specific conditions of their work sites.