Safety Assistant
Powered by SALUSIQ
  • Terms of Service
  • Privacy Policy
  • Safety powered by SALUS
Safety Assistant
Powered by SALUSIQ
General Safety Inspection
Generated on: April 26, 2025

General Safety Inspection Checklist

Purpose: This checklist is designed to ensure a comprehensive safety inspection of the workplace, focusing on identifying and mitigating potential hazards.

Instructions: Use this checklist to conduct regular safety inspections. Mark each item as complete or incomplete. Note any corrective actions required and ensure follow-up.

1. Pre-Inspection Preparation

  • Review the establishment's inspection history and relevant industry information .
  • Ensure all necessary personal protective equipment (PPE) is available and used .
  • Gather all required forms and materials for documentation .

2. Personal Protective Equipment (PPE)

  • Ensure all employees are wearing appropriate PPE, including hard hats, safety goggles, gloves, and safety shoes .
  • Check that PPE is in good condition and fits properly .

3. Equipment and Machinery

  • Verify that all equipment is clean and free from debris to prevent contamination and facilitate maintenance .
  • Ensure all covers, guards, and safety devices are securely attached and in good condition .
  • Conduct functional testing to ensure equipment is operating correctly .
  • Tag out any equipment that is not safe to operate .

4. Environmental Conditions

  • Check for adequate lighting and ventilation in all work areas.
  • Ensure walkways and exits are clear of obstructions and hazards .
  • Inspect for any signs of leaks or spills and address them immediately .

5. Procedures and Documentation

  • Confirm that all safety procedures are up-to-date and accessible to employees .
  • Ensure that all inspections and maintenance are documented, including any deficiencies and corrective actions taken .

6. Follow-Up Actions

  • Document any deficiencies found during the inspection.
  • Assign corrective actions and deadlines for completion.
  • Schedule a follow-up inspection to verify that corrective actions have been implemented.

Signature: ______________________
Date: ______________________

Notes/Comments:



References:

  • UOSH Field Operations Manual
  • Kobelco Operation Manual
  • Oregon Safe Employment Act

Important Safety Note:

Always verify safety information with your organization's specific guidelines and local regulations.

  • Terms of Service
  • Privacy Policy
  • Safety powered by SALUS