Here is a safety checklist for heavy equipment inspection, focusing on pre-operation checks:

Heavy Equipment Inspection Checklist

Equipment: [Equipment ID/Name] Inspector: [Inspector's Name] Date: [Date of Inspection]

Instructions:

• Complete this checklist before operating the equipment.
• Mark each item as either "Pass" or "Fail."
• If an item fails, record the corrective action taken before operation.

Checklist

1. General Condition

• Equipment is clean and free of debris.
• No visible damage (cracks, dents, leaks).
• All guards and safety devices are in place and functional.
• Corrective Actions:

2. Fluid Levels

• Engine oil level is within the acceptable range.
• Coolant level is adequate.
• Hydraulic fluid level is correct.
• Fuel level is sufficient for the intended work period.
• Corrective Actions:

3. Tires/Tracks

• Tires are properly inflated (if applicable).
• Tracks are in good condition and properly tensioned (if applicable).
• No cuts, bulges, or excessive wear on tires/tracks.
• Corrective Actions:

4. Brakes

• Parking brake engages and holds.
• Service brakes are functional.
• Corrective Actions:

5. Steering/Controls

• Steering is responsive and smooth.
• All control levers and pedals operate correctly.
• Corrective Actions:

6. Lights and Signals

• Headlights, taillights, and brake lights are working.
• Turn signals are functional.
• Backup alarm is working.
• Corrective Actions:

7. Safety Equipment

• Seatbelt is present and functional.
• Fire extinguisher is present, charged and readily accessible.
• First-aid kit is available.
• Corrective Actions:

8. Engine

• Engine starts and runs smoothly.
• No unusual noises or excessive smoke.
• Corrective Actions:

9. Operator Protective Equipment (PPE)

• Hard hat available and in good condition.
• Safety glasses or face shield available.
• High-visibility clothing available.
• Appropriate footwear available.
• Corrective Actions:

10. Environmental

• Equipment is free of leaks that could cause environmental contamination.
• Corrective Actions:

Certification I certify that I have inspected the equipment listed above and that it is safe to operate, except where noted under "Corrective Actions."

Inspector Signature: [Signature Placeholder]

Supervisor Signature: [Signature Placeholder] (if required)