Safety Assistant
Powered by SALUSIQ
RESEARCH

Create a safety checklist for construction site setup

Generated on: April 14, 2025

Construction Site Setup Safety Checklist

Purpose: Ensure the safe setup of a construction site by identifying and mitigating potential hazards.

Instructions: Use this checklist before commencing construction activities. Mark each item as complete or incomplete. Note any corrective actions required.

1. Site Preparation

  • Site Cleanliness: Ensure the site is clean and free from materials or equipment that could cause slips or trips [1].
  • Lighting: Verify that lighting is sufficient for safe work and that emergency lighting is available and functional [1].
  • Signage: Post warning signs for any open building shafts or other hazards [2].

2. Equipment and Material Handling

  • Pallets and Storage Racks: Ensure pallets and storage racks are used and maintained properly to prevent danger to workers [1].
  • Securing Equipment: Ensure all equipment and materials are secured to prevent dislodgement or movement [3].
  • Hoses and Piping: Restrain hoses and piping under pressure to prevent injury from movement [3].

3. Structural Safety

  • Skeleton Structures: Ensure erection drawings and procedures are certified by a professional engineer and followed correctly [3].
  • Bracing and Supports: Verify that all temporary supports and bracing are installed as per engineering specifications [4].

4. Safety Equipment

  • Personal Protective Equipment (PPE): Ensure all workers have and use appropriate PPE for the tasks they are performing [5].
  • Fall Protection: Install and verify the use of fall-arrest systems where necessary [6].

5. Emergency Preparedness

  • Emergency Plan: Ensure an emergency response plan is in place and communicated to all workers [7].
  • First Aid: Verify that first aid kits are available and accessible on site [7].

6. General Safety

  • Training: Confirm that all workers are trained in site-specific safety procedures and equipment use [5].
  • Communication: Ensure clear communication channels are established for reporting hazards and incidents [8].

Notes/Comments:


Corrective Actions Required:


Prepared by: ____________________ Date: ________________

Reviewed by: ____________________ Date: ________________


Important Safety Note:

Always verify safety information with your organization's specific guidelines and local regulations.

References

Page links are approximate
[1]↑

Occupational Health and Safety Code

Open Document

Page 123

[2]↑

Occupational Health and Safety Code

Open Document

Page 180

[3]↑

Occupational Health and Safety Code

Open Document

Page 124

[4]↑

Occupational Safety General Regulations (N.S. Reg. 44/99)

Open Document

Page 86

[5]↑

Spider by Brand Safway: Swing Stage Operator’s Manual

Open Document

Page 3

[6]↑

Spider by Brand Safway: Swing Stage Operator’s Manual

Open Document

Page 6

[7]↑

Occupational Health and Safety Code

Open Document

Page 7

[8]↑

Occupational Health and Safety Regulations, 2020 (Sask. Reg. 10/2020)

Open Document

Page 252

AI Safety Tools

  • Toolbox Talks
  • Pre-Task Plans
  • Risk Assessments
  • Safe Work Procedures
  • Safety Checklists

Company

  • About
  • Contact
  • Terms of Service
  • Privacy Policy

© 2026 SALUS Safety. All rights reserved.

< for the nerds />
Assistant
History
DocumentsLabs