When are you required to wear a fall protection
Personal Fall Protection Equipment Requirements and Safety Regulations
This document outlines the conditions under which personal fall protection equipment (PFPE) is required and the relevant safety regulations concerning fall hazards. It is based on industry best practices and information found in the cited Genie operator's manuals. This information is intended to provide a comprehensive overview of fall protection requirements to promote a safe working environment.
General Requirements for Personal Fall Protection Equipment (PFPE)
PFPE is generally required when operating machinery covered in the provided source documents. [2]
Specific Regulations and Guidelines
Occupants must wear a safety belt or harness in accordance with governmental regulations. [2]
Operators must comply with employer, job site, and governmental rules regarding the use of personal protective equipment. [2]
All PFPE must comply with applicable governmental regulations and must be inspected and used in accordance with the PFPE manufacturer's instructions. [2]
Proper Use of Personal Fall Protection Equipment
When using PFPE, attach the lanyard to the anchor provided in the platform. [2]
Platform Safety
Maintain firm footing on the platform floor at all times. [1]
Keep the platform floor clear of debris to prevent slips, trips, and falls. [1]
Do not sit, stand, or climb on the platform guard rails. [1]
Additional Safety Measures
Lower the platform entry mid-rail or gate before operating. [1]
Do not exit the platform while raised. If a power failure occurs, have ground personnel activate the manual lowering valve. [1]
Machine Stability
Do not operate the machine in strong or gusty winds. Do not increase the surface area of the platform or the load. Increasing the area exposed to the wind will decrease machine stability. [1]
Maximum Capacity
Occupants, equipment, and materials shall not exceed the maximum platform capacity. [1]
| ANSI, CSA, AUS & CE models | |
|---|---|
| Maximum capacity | 350 lbs / 159 kg |
| Maximum occupants | 1 person |
| ANSI, AUS & CE models | |
|---|---|
| Maximum capacity IWP-20S with outreach option | 300 lbs / 136 kg |
| Maximum occupants | 1 person |
Safety powered by SALUS
Important Safety Note:
Always verify safety information with your organization's specific guidelines and local regulations.
References
Page links are approximateGenie IWP Super Series - 6th Edition - ANSI CSA from SN IWPP-13000, IWP Super Series (PN 1298036GT)
Open DocumentPage 15