Safety Procedures for On-Site Fuel Farms (Diesel and Gasoline)

This document outlines the safety procedures for on-site fuel farms storing diesel and gasoline, covering fire prevention, spill control, and hazardous material handling. These procedures are designed to minimize risks associated with fuel storage and dispensing, ensuring a safe working environment.

Fire Prevention

Preventing fires is crucial in fuel storage areas. The following measures must be implemented:

• No Smoking: Smoking is strictly prohibited within the fuel farm area.
• Open Flames and Sparks: Avoid open flames, sparks, and other ignition sources near fuel storage and dispensing areas.
• Welding Precautions: Unauthorized welding can cause structural failure or possible personal injury. DO NOT weld on any structural member. All unauthorized welding will void the warranty.
• Cleanliness: Keep the area free of trash, grease, and debris to prevent potential fire hazards. Always clean up spilled fuel.
• Electrical Safety: Ensure all electrical equipment is properly grounded and maintained to prevent sparks.
• Fire Extinguishers: Maintain appropriate fire extinguishers, inspected regularly, and readily accessible.
• Refueling Safety: Handle fuel with care, as it is highly flammable. Do not refuel the machine while smoking or when near open flames or sparks. Always stop the engine before refueling the machine. Fill the fuel tank outdoors.
• Equipment Maintenance: Regularly inspect and maintain all fuel storage and dispensing equipment to prevent leaks and malfunctions.

Spill Control

Effective spill control measures are essential to minimize environmental impact and safety hazards:

• Spill Prevention: Implement measures to prevent spills, such as using appropriate filling and dispensing equipment and avoiding overfilling.
• Containment: Provide adequate secondary containment systems, such as dikes or berms, around storage tanks to contain potential spills.
• Spill Response Plan: Develop and maintain a comprehensive spill response plan that includes procedures for containing, cleaning up, and reporting spills.
• Spill Kits: Keep spill kits readily available in designated locations. These kits should include absorbent materials, personal protective equipment (PPE), and cleanup tools.
• Training: Train personnel on proper spill response procedures, including the use of spill kits and reporting requirements.
• Clean Up Spilled Fuel: Always clean up spilled fuel.
• Reporting: Report all spills immediately to the appropriate authorities and internal personnel.

Hazardous Material Handling

Proper handling of diesel and gasoline is critical to prevent exposure and incidents:

• Personal Protective Equipment (PPE): Wear appropriate PPE, such as gloves, eye protection, and respirators (if necessary), when handling fuels.
• Ventilation: Ensure adequate ventilation in enclosed areas to prevent the buildup of hazardous vapors.
• Storage: Store fuels in approved containers and in designated storage areas that meet regulatory requirements.
• Labeling: Clearly label all fuel containers with the appropriate hazard warnings and contents.
• Material Safety Data Sheets (MSDS): Maintain readily accessible Material Safety Data Sheets (MSDS) for all fuels stored on-site.
• Training: Provide comprehensive training to all personnel who handle fuels, covering the hazards, safe handling practices, and emergency procedures.
• Static Electricity: Take precautions to prevent static electricity buildup during fuel transfer, such as grounding containers and equipment.
• Disposal: Dispose of waste fuels and contaminated materials in accordance with environmental regulations.

General Safety Procedures

• Hand Holds and Steps: Slips and falls can cause serious injury. When getting on and off the machine, always maintain a three point contact with steps and hand rails while facing the machine. DO NOT use the steering wheel or any other controls as handrails. NEVER jump on or off the machine. Be careful of slippery conditions on platforms, steps and handrails when getting on and off the machine. ALWAYS shut off the engine before leaving the operator's station.

Safety powered by SALUS