Well Decommissioning by Water Flooding: Preventing Contamination Hazards

Date: 2025-09-09

Duration: [DURATION] minutes

Presenter: [PRESENTER NAME]

Location: [LOCATION]

Objective

To ensure all personnel understand the safety procedures for well decommissioning using water flooding, focusing on preventing contamination hazards and adhering to proper handling and disposal methods.

Introduction

This toolbox talk covers the safety procedures for well decommissioning using water flooding. The primary goal is to prevent contamination hazards by understanding the risks associated with hydraulic fluids and implementing proper control measures.

Hazard Identification

During well decommissioning via water flooding, several hazards can lead to contamination and potential harm. It is crucial to identify and understand these hazards to implement effective control measures.

• Skin Contact with Hydraulic Fluid: Frequent and prolonged skin contact can cause dermatitis or severe irritation. [1]
• Eye Contact with Hydraulic Fluid: Splashing hydraulic fluid into the eyes can cause irritation and potential damage. [1]
• Hydraulic Fluid Injection: Hydraulic fluid under pressure can penetrate the skin, causing serious injury, blindness, and even death. Fluid leaks under pressure may not always be visible. [1] [1]
• Environmental Contamination: Improper handling or disposal of hydraulic fluid can lead to soil and water contamination, causing long-term environmental damage.

Control Measures

• Wear appropriate PPE: Always wear gloves, eye protection, and protective clothing when handling hydraulic fluids to prevent skin and eye contact.
• Ensure proper ventilation: Work in well-ventilated areas to minimize exposure to hydraulic fluid vapors.
• Use proper handling techniques: Avoid splashing or creating aerosols when handling hydraulic fluids. Use funnels and spill containment measures.
• Implement spill control measures: Keep spill kits readily available and ensure personnel are trained in their use. Clean up spills immediately and dispose of contaminated materials properly.
• Proper disposal of hydraulic fluids: Dispose of used hydraulic fluid and contaminated materials according to environmental regulations. Use designated containers and disposal sites.

Personal Protective Equipment (PPE) Requirements

• Gloves: Wear chemical-resistant gloves to prevent skin contact with hydraulic fluids. Ensure gloves are in good condition and replace them if they are torn or punctured.
• Eye Protection: Use safety glasses or face shields to protect eyes from splashes. Ensure eye protection fits properly and is clean.
• Protective Clothing: Wear long sleeves and pants or coveralls to minimize skin exposure. Use aprons or other protective garments when handling large quantities of hydraulic fluid.

Real-World Example or Case Study

A worker failed to wear gloves while disconnecting a hydraulic line, resulting in prolonged skin contact with hydraulic fluid. This led to a severe case of dermatitis, requiring medical treatment and lost work time. This incident highlights the importance of wearing appropriate PPE at all times.

Emergency Procedures

1. If hydraulic fluid splashes into the eyes, wash them thoroughly with abundant quantities of water. Seek medical advice if irritation persists. [1]
2. If hydraulic fluid penetrates the skin, seek medical attention immediately. Surgical removal may be necessary. [1]
3. In case of a large spill, contain the spill using absorbent materials and notify the appropriate environmental authorities.

Questions and Answers

• Q: What type of hydraulic fluid is recommended?

A: We strongly recommend the use of MOBIL DTE-15 HYDRAULIC FLUID. An EXACT substitute can be used if absolutely necessary.

• Q: How often should hydraulic fluid be checked for contamination?

A: Under normal operating conditions, hydraulic fluid should be checked once a year. In extremely dusty or dirty conditions, it should be checked every 6 months.

Summary

Recap of main points:

• Always wear appropriate PPE, including gloves, eye protection, and protective clothing, when handling hydraulic fluids.
• Implement spill control measures and clean up spills immediately to prevent environmental contamination.
• Dispose of used hydraulic fluid and contaminated materials according to environmental regulations.
• In case of skin injection, seek immediate medical attention.

Report all hazards, near-misses, and incidents to your supervisor immediately.

Safety powered by SALUS