I need an SDS for polyethylene from Med Lab Supply

The provided source documents do not appear to be an SDS for polyethylene from Med Lab Supply. They are primarily an SDS for 4-Nonylphenyl-polyethylene glycol from Sigma-Aldrich/MilliporeSigma, plus general WHMIS guidance. Based on those documents, I can summarize the available SDS information, but it should not be treated as a verified Med Lab Supply polyethylene SDS. [1] [1]

For the product in the supplied SDS, the GHS hazard classification under OSHA HazCom is: Skin Irritation Category 2, Eye Irritation Category 2A, and Aquatic Chronic Category 2. The label signal word is Warning. Hazard statements include: causes skin irritation, causes serious eye irritation, and toxic to aquatic life with long lasting effects. The SDS explicitly states classification is in accordance with 29 CFR 1910 (OSHA HCS). [1] [1] [2]

Supplier identification in the supplied SDS is Sigma-Aldrich Inc., 3050 Spruce St, St. Louis, MO 63103, United States, telephone +1 314 771-5765. Emergency contact is CHEMTREC 800-424-9300 (USA) and +1-703-527-3887 (International), available 24 hours/day, 7 days/week. The identified use is laboratory chemicals and synthesis of substances. [1] [1] [1]

Composition in the supplied SDS is Ethoxylated nonylphenol (CAS 9016-45-9, EC 500-024-6) at <= 100%. This is a substance SDS and not a polyethylene resin SDS. Therefore, it does not verify the composition of a Med Lab Supply polyethylene product. [2] [2]

Handling and storage

• Avoid contact with skin and eyes.
• Avoid inhalation of vapor or mist.
• Use good industrial hygiene and safety practice; wash hands before breaks and at the end of the workday.
• Keep container tightly closed in a dry, well-ventilated place.
• Reseal opened containers carefully and keep them upright to prevent leakage.
• Keep away from incompatible materials such as strong oxidizing agents.

[3] [3] [4] [6] Exposure controls and personal protective equipment

• The supplied SDS states there are no listed occupational exposure limit values for the ingredients.
• Use appropriate engineering controls and general ventilation consistent with good industrial hygiene practice.
• Wear safety glasses with side shields meeting appropriate standards such as EN166 or equivalent.
• Wear protective gloves; the SDS gives nitrile rubber as an example glove material.
• Use impervious protective clothing as needed based on the amount used and workplace conditions.
• If risk assessment indicates inhalation risk, use an appropriate respirator; the SDS references a full-face respirator with multi-purpose combination cartridges or type ABEK cartridges as backup to engineering controls.

[4] [4] [4] [4] [5] [5] First-aid measures

• General: Consult a physician and show the SDS to medical personnel.
• Inhalation: Move the person to fresh air. If not breathing, give artificial respiration. Seek medical attention.
• Skin contact: Wash with soap and plenty of water. Seek medical advice if needed.
• Eye contact: Rinse with plenty of water for at least 15 minutes and consult a physician.
• Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water and consult a physician.

[2] [2] [2] [2] [3] Fire-fighting measures

• Suitable extinguishing media: water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
• The material is described as combustible.
• Hazardous decomposition products are not known from the SDS excerpt.
• Firefighters should wear self-contained breathing apparatus if necessary.

[3] [3] [3] Spill and accidental release response

• Use personal protective equipment and ensure adequate ventilation.
• Avoid breathing vapors, mist, or gas.
• Prevent further leakage or spillage if safe to do so.
• Do not allow the material to enter drains or be discharged to the environment.
• Absorb with inert material and place in suitable closed containers for disposal as hazardous waste.

[3] [3] [3] Regulatory information

• The supplied SDS includes OSHA HazCom classification under 29 CFR 1910.
• Under SARA 311/312, the product is listed as an Acute Health Hazard.
• The SDS states the material does not contain Section 302 extremely hazardous substances.
• Ethoxylated nonylphenol is listed as subject to SARA Title III, Section 313 reporting.
• For transport, DOT (US) lists it as not dangerous goods, while IMDG/IATA classify it as UN3082 environmentally hazardous substance under certain conditions.

[1] [8] [8] [8] [8] [8] For OSHA HazCom/WHMIS compliance expectations generally, an SDS should identify the product and supplier, hazard classification and label elements, composition, first aid, fire-fighting, accidental release, handling and storage, exposure controls/PPE, transport, regulatory information, and revision date. If you need the actual Med Lab Supply polyethylene SDS, verify the exact product name, grade, and supplier details on the container and obtain the matching SDS directly from Med Lab Supply or the distributor before use. [12] [7] [10] [11] [9]