Pallet. Jack equipment
Generated on: August 6, 2025
Pallet Jack Safe Operating Procedures Checklist
Date: 2025-08-06
Inspector: [INSPECTOR NAME]
Location/Area: [LOCATION/AREA]
Department: [DEPARTMENT]
Purpose
This checklist is to ensure safe operating procedures for pallet jacks, including pre-use inspection, load handling, and PPE requirements, to prevent workplace injuries.
Instructions for Use
- Complete this checklist before each shift or use of the pallet jack.
- Record any issues or concerns identified during the inspection.
- Sign and date the checklist to verify completion.
Frequency
This checklist should be completed: Daily
Safety Checklist
Pre-Use Inspection
| Item | Pass | Fail | Comments |
|---|---|---|---|
| Check the pallet jack for any visible damage, such as cracks, bends, or broken parts. Check: No visible damage is present. If failed: Remove the pallet jack from service and report the damage for repair. | _________________ | ||
| Inspect the wheels for wear and tear, and ensure they rotate freely. Check: Wheels are in good condition and rotate smoothly. If failed: Replace worn or damaged wheels. Lubricate if necessary. | _________________ | ||
| Verify that the hydraulic system is functioning correctly, with no leaks. Check: The pallet jack lifts and lowers smoothly without any leaks. If failed: Do not use the pallet jack if there are hydraulic leaks. Report for maintenance. | _________________ | ||
| Ensure the handle and controls are in good working order. Check: Handle moves freely and controls respond as expected. If failed: Repair or replace the handle or controls if they are not functioning properly. | _________________ |
Personal Protective Equipment (PPE)
| Item | Pass | Fail | Comments |
|---|---|---|---|
| Ensure the operator is wearing appropriate safety shoes. Check: Safety shoes with steel toes are worn. If failed: Operator must wear safety shoes before operating the pallet jack. | _________________ | ||
| Check that gloves are available and in good condition for handling loads. Check: Gloves are available and free from damage. If failed: Replace damaged gloves before use. | _________________ |
Load Handling
| Item | Pass | Fail | Comments |
|---|---|---|---|
| Verify the load is stable and properly secured on the pallet. Check: Load is stable and not at risk of falling. If failed: Restack and secure the load before moving it. | _________________ | ||
| Ensure the weight of the load does not exceed the pallet jack's maximum load capacity. Check: Load weight is within the specified limit of the pallet jack. If failed: Reduce the load weight to within the pallet jack's capacity. | _________________ | ||
| Check the path is clear of obstructions and hazards. Check: The path is free from obstacles, debris, and other hazards. If failed: Clear any obstructions before moving the load. | _________________ |
Work Area
| Item | Pass | Fail | Comments |
|---|---|---|---|
| Check operating surfaces for holes, bumps, drop-offs, obstructions, debris, concealed holes, and other potential hazards. Check: The surface is free of hazards. If failed: Clear and/or mark any hazards. | _________________ |
General Requirements
| Item | Pass | Fail | Comments |
|---|---|---|---|
| Ensure only trained and authorized personnel operate the pallet jack. Check: Operator has completed the required training. If failed: Provide training before allowing operation. | _________________ | ||
| Read, understand, and obey all DANGERS, WARNINGS, CAUTIONS, and operating instructions. Check: Operator acknowledges understanding of safety precautions and operating instructions. If failed: Review safety precautions and operating instructions with the operator. | _________________ |
Failed Item Procedures
- If any item fails the inspection, remove the pallet jack from service immediately.
- Report any failed items to the supervisor or maintenance personnel.
- Do not attempt to repair the pallet jack unless properly trained and authorized.
Documentation Requirements
Keep a record of all inspections and maintenance activities.
Checklist Completion
Overall Status: ☐ Pass ☐ Fail ☐ Corrective Actions Required
Inspector Signature: Date:
Supervisor Review: Date:
Corrective Actions Completed By: Date:
References and Standards
- Refer to the manufacturer's operating manual for specific instructions and safety guidelines.
- Follow all applicable local and governmental regulations related to pallet jack operation.
This checklist must be retained for [RETENTION PERIOD].
Safety powered by SALUS
Important Safety Note:
Always verify safety information with your organization's specific guidelines and local regulations.