Safety Data Sheet (SDS) for Isopropyl Alcohol (IPA)

This document provides safety information regarding the handling, hazards, and first aid measures for Isopropyl Alcohol (IPA). It is essential to consult the full SDS for comprehensive details.

Handling Precautions

General Safe Handling Practices

To ensure safe handling, it is crucial to avoid contact with skin, eyes, and clothing. Additionally, avoid breathing mist or vapor. Persons susceptible to allergic reactions should not handle the product. Handling should not commence until all safety precautions have been thoroughly read and understood. Adequate ventilation is essential, and good industrial hygiene practices should be observed. [4]

Personal Protective Equipment (PPE)

Appropriate personal protective equipment (PPE) is necessary to minimize exposure. This includes wearing safety glasses with side shields or goggles for eye protection. Wear appropriate chemical-resistant gloves and clothing for skin protection. In situations with insufficient ventilation, suitable respiratory equipment should be used. When necessary, wear appropriate thermal protective clothing. [4] [4] [4] [4] [4]

Storage

Store in a well-ventilated place and keep the container tightly closed. Ensure the storage area is cool. The product should be stored away from incompatible materials. [1] [4]

Spill Management

In the event of a spill, implement the following measures:

• Large Spills: Stop the flow of material if it can be done safely. Dike the spilled material to contain it. Absorb the material with vermiculite, dry sand, or earth, and place it into appropriate containers. After product recovery, flush the area with water.
• Small Spills: Wipe up spills with absorbent materials such as cloth or fleece. Clean the surface thoroughly to remove any residual contamination.

Never return spills to the original containers for reuse. Refer to Section 13 of the SDS for waste disposal information. Prevent the release of the material into the environment, including drains, water courses, or the ground. The environmental manager must be informed of all major releases. [1] [1] [1]

Hazard Communication

Exposure and Symptoms

Inhalation of high concentrations of vapors may cause irritation to the respiratory system. Skin contact can cause skin irritation, and eye contact can cause serious eye irritation. Ingestion may lead to irritation and malaise. Irritant effects and symptoms including nausea, vomiting, and diarrhea may occur. [2] [2] [2] [2] [3]

Occupational Exposure Limits

The following table outlines occupational exposure limits for certain components. These limits are provided as guidelines for maintaining a safe working environment. Always refer to local regulations for compliance.

Components	Type	Value	Form
Carbon black (CAS 1333-86-4)	TWA	3 mg/m3	Inhalable fraction.
Quartz (CAS 14808-60-7)	TWA	0.025 mg/m3	Respirable fraction.
Titanium dioxide (CAS 13463-67-7)	TWA	10 mg/m3

[1] [1] [1] First Aid Measures

The following first aid measures should be implemented in case of exposure:

Inhalation

Remove the victim to fresh air and keep them at rest in a comfortable position for breathing. If breathing is difficult, administer oxygen or artificial respiration. Immediately seek medical attention. [3]

Skin Contact

Immediately flush skin with plenty of water. Remove contaminated clothing and wash before reuse. Get medical attention. [3]

Eye Contact

Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Get medical attention. [3]

Ingestion

Immediately rinse mouth and drink plenty of water. Keep the person under observation. If the person becomes uncomfortable, take them to a hospital along with these instructions. [3]

General Information

Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. [3]

Safety powered by SALUS