Lull Safety Checklist

Purpose: This checklist is designed to ensure the safe operation and maintenance of Lulls (telescopic handlers) in the workplace.

Instructions for Use

• Complete this checklist before operating the Lull.
• Mark each item as complete or incomplete.
• Note any corrective actions required.
• Ensure all safety measures are in place before operation.

Pre-Operation Checks

1. Operator Training and Certification

   • Verify that the operator is trained and certified to operate the Lull.
   • Ensure the operator is familiar with the specific model and its controls.

2. Equipment Inspection

   • Inspect the Lull for any visible damage or leaks.
   • Check that all covers and guards are securely attached and undamaged [1].
   • Ensure that the mirrors are adjusted for optimal visibility [1].
   • Verify that the swing drive and other components are free of leaks [1].

3. Safety Features

   • Confirm that all safety decals and instructions are legible and in place.
   • Test the horn, lights, and backup alarm to ensure they are functioning.
   • Check that the seatbelt is operational and in good condition.

4. Load Handling

   • Ensure the load does not exceed the rated load capacity [2].
   • Verify that load charts are available and understood by the operator [2].
   • Use tag lines to control loads when necessary, ensuring they are non-conductive if near electrical equipment [3].

During Operation

1. Safe Operation Practices

   • Maintain a safe distance from other workers and equipment.
   • Keep the load as close to the ground as possible when traveling [3].
   • Use hand signals as needed, provided by a competent signaller [3].

2. Environmental Considerations

   • Be aware of and avoid overhead power lines and other hazards.
   • Ensure the work area is clear of unnecessary personnel and obstacles.

Post-Operation Checks

1. Shutdown Procedures

   • Park the Lull on a level surface and engage the parking brake.
   • Lower the forks to the ground and turn off the engine.

2. Post-Use Inspection

   • Inspect the Lull for any new damage or issues that occurred during operation.
   • Report any maintenance needs or safety concerns to the supervisor immediately.

Corrective Actions

• Use the space below to note any corrective actions taken or required:

  • ---

  • ---

Signatures

• Operator: ___________________________ Date: __________
• Supervisor: __________________________ Date: __________